Akademik Veri Yönetim Sistemi
Light and Engineering, cilt.30, sa.1, ss.29-38, 2022 (SCI-Expanded, Scopus)
Today, illumination systems use approximately 1/3 of the electrical energy produced. For this rea-son, new technologies constantly increase energy efficacy in illumination technology. Consequently, the use of LED type light sources gets more wide-spread with low power electronics-based versions. The most important advantage of this type of systems has high luminous efficacy. However, since electronic systems have non-linear static loads, they cause unwanted harmonics in electrical distribution systems. Harmonics affect the operational safety as they cause unnecessary heating of the conductors in the electrical network. It also adversely affects the measuring and control systems of the buyers and so decreases the energy performance. In this study, an adaptive Butterworth low pass active harmonic filter model that can cut all current/voltage harmonics outside the operating frequency of different types of LED driver light sources is designed. In addition, harmonic analysis of different LED driver systems is performed experimentally by considering the total harmonic distortions (THD,%). In this way, harmonic components and (THD) values of different LED systems are obtained. These harmonic components obtained is filtered with the designed filter structure and the effects of the filter structure at each filter-ing degree on the harmonic components and THD were investigated. In this way, the designed filter is proved to be an adaptive model that can be adjust-ed automatically for different types of LED systems.